Please log-in to create a wish list.
Times Microwave
Fits
3/8" Cable (RG8 Type)
-
TIMES MICROWAVE Butterfly Hanger for LMR-400 cable. Order mounting hardware separately. 10 Pack..
Mfg. Warranty
3 Years
Read More
Times Microwave
Fits
LMR-600 Cable
-
TIMES MICROWAVE BH-12-NH Butterfly Hanger Kit for LMR-600 Coaxial Cable
Mfg. Warranty
3 Years
Read More
Sabre
Fits
7/8" Cable
-
Sabre Site Solutions Stackable snap-in hangers for 7/8" cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction
Mfg. Warranty
3 Years
Read More
Sabre
Fits
1/2" Cable
-
SABRE SITE SOLUTIONS Clip Style Hanger for 1/2" diameter Cable. Provides slot and 3/8" mounting hole. Includes mtg. hardware.
Mfg. Warranty
3 Years
Read More
Sabre
Fits
3/8" Cable (RG8 Type)
-
SABRE SITE SOLUTIONS standard hanger for 3/8" corrugated & smooth wall cable and braided cable LMR- 400/RG8/RG213/9913
Mfg. Warranty
3 Years
Read More
RADIO FREQUENCY SYSTEMS
Fits
7/8" Cable
-
Hanger kit with slot for 7/8" cable. Recommended spacing every 3 ft. 10 pack
Mfg. Warranty
3 Years
Read More
RADIO FREQUENCY SYSTEMS
Fits
1/2" Cable
-
RFS Clic Clamp for 1/2" Cable. Enable safe and effcient installation of Radiaflex clable with Clic-Clamps. Achieve simple mounting by using wall plugs.
Mfg. Warranty
3 Years
Read More
Narrative
Stackable snap-in hanger kits can be stacked up to three deep when using 1/2" and 7/8" coax, or two deep when using 1-1/4" and 1-5/8" coax. The distinctive, self-contained design of the stackable snap-in hangers eliminates the need for mounting hardware and installation tools. This simplifies coaxi
Read More
Narrative
Stainless Steel Snap-In Hangers, which simply push into pre-punched 3/4" holes, save installation time over standard bolt-on hangers. They use tabs or prongs to ensures a positive attachment to the mounting surface and to secure the cable within the clamp. Use one for every 3' of cable or waveguide
Read More
Narrative
Stainless Steel Snap-In Hangers, which simply push into pre-punched 3/4" holes, save installation time over standard bolt-on hangers. They use tabs or prongs to ensures a positive attachment to the mounting surface and to secure the cable within the clamp. Use one for every 3' of cable or waveguide
Read More
Narrative
Stainless Steel Snap-In Hangers, which simply push into pre-punched 3/4" holes, save installation time over standard bolt-on hangers. They use tabs or prongs to ensures a positive attachment to the mounting surface and to secure the cable within the clamp. Use one for every 3' of cable or waveguide
Read More
Commscope
Connector Type
Insert Adapters for 3/4" to 3/8" threaded holes. For use with COMMSCOPE UA-3 Hangers
Mfg. Warranty
10 Years
Read More
Commscope
Fits
1/2" to 1-5/8" Cable
-
Universal Snap In Adapter for mounting 1/2"-1-5/8" Snap In hangers to angle or round tower members. Stainless steel. 3/4"pre-punched holes. 10 Pack.
Use in combination with Part# Commscope UAAI for 3/8" Coaxial Cable
Mfg. Warranty
10
Read More
Commscope
Fits
3/8" Cable (RG8 Type)
-
COMMSCOPE "SNAPSTAK" Snap-in hangers for 3/8" cable. The hanger installs in 3/8" holes in support structures. Stainless steel construction.
Mfg. Warranty
10 Years
Read More
Commscope
Fits
7/8" Cable
-
CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar.
Mfg. Warranty
10 Years
Read More
Commscope
Fits
7/8" Cable
-
CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction
Mfg. Warranty
10 Years
Read More
COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-5/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Triple Stack Capability, 10 PACK Read More
Commscope
Fits
1/2" Cable
-
SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar.
Mfg. Warranty
3 Years
Read More
Commscope
Fits
1/2" Cable
-
SnapStak hangers for 1/2" cable
Mfg. Warranty
10 Years
Read More
Commscope
Fits
1-1/4" Cable
-
SnapStak Hanger for 1-1/4" coaxial cable, triple stack capability, includes reinforcement bar.
Mfg. Warranty
10 Years
Read More
Commscope
Fits
1-1/4" Cable
-
COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction
Mfg. Warranty
10 Years
Read More
Commscope
-
1/2" stainless buckle clamps (100 pack)
Mfg. Warranty
5 Years
Read More
Commscope
Fits
7/8" Cable
-
COMMSCOPE Self-locking Hanger for 7/8" Radiating Cable. 50 pack, black
Mfg. Warranty
3 Years
Read More
COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color Read More