My Lists
Please log-in to create a wish list.
Featured Products
-
Commscope CPT-78U$306.95 -
Alinco DJ-500TB$119.95 -
Browning BR-6155$79.95 -
Daiwa CN-901HP$155.95
Rohn 25G Accessories
Rohn 1/2X12BB
Hot-dip galvanized base bolt. 1/2-in x 12-in + 2-in (hook)
Mfg Part #: R-1/2X12BB
Read More
Rohn 25JBK
The ROHN 25JBK section joint bolt kit includes three (3) ½-in by 1 ½-in NF zinc plated Grade 5 bolts with nuts and three (3) 5/16 by 1 ½-in NF zinc plated bolts Grade 5 with nuts. This is the same kit that comes standard from the factory with all ROHN model 25G tower sections Mfg Part # R-25JBK Mfg. Part... Read More
Rohn 3/4X12PP
ROHN's 3/4X12PP pier pin for use with 25G, 45G, and 55G concrete base plates. Read More
Rohn AGK1GGX
Anchor wire ground kit; Consists of three 10ft copper clad steel rods, 3 clamps,1 anchor rod clamp, and 45ft of 7/16 6x25 EIP IWRC RRL grounding wire. Read More
Rohn AGK1GGX-1
Anchor wire grounding kit. Consists of 3 clamps,1 anchor rod clamp, and 45ft of 7/16 6x25 EIP IWRC RRL ground wire. Read More
Rohn APL25G
The ROHN R-APL25G assembly plate /top beacon plate is designed for use with the ROHN model 25G tower sections. It bolts directly to the top of a standard tower section and can be used for mounting a beacon light or other similar piece of equipment at the top of the tower. Each R-APL25G assembly is completely hot-dip... Read More
Rohn AS25G
The ROHN AS25G single accessory shelf is designed to bolt to all three side rails of any standard ROHN model 25G tower section to accommodate the mounting of beacon lights, antenna rotors, and similar top-mounted attachments anywhere along the section length or at the section top.. It comes complete with three (3) U... Read More
Rohn BAS25G
The ROHN R-BAS25G bearing and accessory shelf is designed as a complete unit with top and bottom plate and integrated tubular legs. ROHN has designed the assembly to be compatible with its line of 25G standard tower sections and it is meant to me installed as the topmost section of the tower. The R-BAS25G is drilled... Read More
Rohn EF2545
25G/45G Erection Fixture, 12 ft erection fixture for towers with 1 1/4 in side rails Read More
Rohn GA25GD
The ROHN R-GA25GD guy bracket assembly mounts to any standard ROHN 25G tower section along the horizontal bracing members and is used primarily as the main guy strand to tower anchor point in guyed configurations of the ROHN 25G towers. Each hot-dip galvanized guy bracket assembly comes complete with all necessary... Read More
Rohn GAC5655TOP
Concrete guy anchor 3/4 in rod with five-hole equalizer plate is used at the ground level anchor points of a Rohn 25G, 45G, 55G, and 65G guyed tower installation. Read More
Rohn GAC5755TOP
The Rohn R-GAC5755TOP concrete guy anchor 1 7/16 in rod with five-hole equalizer plate embeds into a standard concrete anchor block at the base of a Rohn 25G, 45G, 55G, or 65G tower with either a 3 or 5 level down guy attachment. Read More
Rohn ROHNJACK
Tower Assembly & Disassembly Tool. Designed to fit 20, 25G, 45G, and 55G ROHN Tower Sections Read More
Rohn SR245
ROHN's R-SR245 safety ring is designed to be used with both the Rohn 25G and 45G model towers Read More
Rohn TA25
The ROHN R-TA25 torque arm stabilizer assembly acts as an anti-twist device when located in the area of antennas. It provides 6-way guying and bolts to the tower at any section joint. The torque arm assembly is attached using joint bolts and must be installed as the ROHN 25G tower sections are joined... Read More
Rohn TB25D
The ROHN R-TB25D torque bar is recommended for use with the ROHN R-GA25GD standard guy bracket at guying locations near microwave and other focused-beam antennas to provide added resistance to torsional movement of the tower. Three (3) bars are needed to modify a standard guy bracket into a torque-stabilized assembly... Read More
Rohn TT-WG-500-W/SMC
ROHN Hands Free Safety Wire Rope Grab Vertical Fall Arrestor. Dual Cams for Double System. Fits 3/8" cable. Read More
Rohn TTFBH-C/P
Professional Climbing Harness with Seat. For use with vertical fall arrest protection system such as the TT-WG-500. Read More
Address
Rexford, MT 59930
Information
Categories
Connect
